Dfi TPC121 Installation Guide Manual de usuario descargar pdf (Pagina 19)

Mounting screw

Bracket

2. Remove these mounting screws and brackets, and

then put them in a safe place for later use.

3. Insert the Expansion card with a bracket into the slot

that is on the riser card. Replace the screw you

removed in step 2 to secure the bracket in place.

Installing the PCI and PCIe x1

Expansion Card

1. The PCI and PCIe x1 slots on the riser card are used to

install the expansion cards. To install the expansion

cards, you need to remove the mounting screws that

secure the brackets to the chassis then remove the

brackets.

PCI

PCIe x1

Expansion card

Note:

The Expansion card used in the illustration above may not resemble the

actual card. These illustrations are for reference only.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Sin comentarios

Dfi TPC121 Installation Guide Manual de usuario Pagina 19